Tag Archives: not loaded

Check that php is installed properly.

In most of the cases, the following should work:

apt-get install libapache2-mod-php5
service apache2 restart

a2endmod may not be necessary.

When you install libapache2-mod-php5, you’ll notice that it will restart apache2 itself. Still, you need to execute the second and third commands before php actually works.

If you need a full installation, the following commands should be executed first:

apt-get -y install php5 php5-cli php5-curl php5-dev php5-gd php5-mcrypt php5-mysql php-pear


Warning: If you use kmix, make sure to configure it to not restore sound levels at startup. This will conflict with the configuration detailed below.

  • Run alsactl -f /var/lib/alsa/asound.state store once to create /var/lib/alsa/asound.state.
# alsactl -f /var/lib/alsa/asound.state store[/code]

  • Edit /etc/rc.conf and add "alsa" to the list of daemons to start on boot-up. This will store the mixer settings on every shutdown and restore them when you boot.
  • If the mixer settings are not loaded on boot-up, add the following line to /etc/rc.local:
# alsactl -f /var/lib/alsa/asound.state restore[/code]

  • These methods still may not work, or you may prefer to have audio settings for individual users. In this case, run alsactl store -f ~/.asoundrc as a normal user. This will save and restore volume settings on a per user basis. To automate this process, add the respective commands to ~/.bash_login and ~/.bash_logout, or the correct locations for the shell of your choice.